0800 88 24 7 26


Cisco CCNA Routing & Switching 200-125 Fault Finding Manual

Posted: June 7th, 2018


Epub Manual CCNA 200-125 Fault Finding Manual

SKU: 123456 Categories: ,


CCNA 200-125 Route & Switch Fault Finding Lab Manual



The Third manual of the CCNA 200-125 Routing and Switch series. 



By purchasing this manual you will also get 1 year of email support from our instructors along with being enrolled onto Commsupport Networks Live Instructor-led Live Online revision sessions. 




The Commsupport Cisco CCNA Routing & Switching 200-125 Fault Finding Labs are unique in the entire industry nothing like this manual exists and is designed with the purpose of testing your fault-finding skills to the limit.



If you can fix every single fault of which there are nearly 120 across 25 labs you are a network engineer ready to take your skills to the workplace.



These fault finding labs will test your ability to understand the following protocols:


  1. VLANs

  2. Spanning Tree

  3. Static Routing

  4. OSPF

  5. EIGRP

  6. BGP,

  7. GRE

  8. HSRP

  9. IPv6

  10. NAT

  11. ACLs



These labs started life as simple challenges in the classroom where the instructor would manually introduce faults into students labs for them to fix, since then we documented the faults and made them into this great unique one of a kind resource for you to test your skills as a network engineer.



This manual is the result of over 10 years of development in the classroom and started life as a series of very short labs which over the years with lots of input from our very own students we have we believe created the very best CCNA 200-125 Route & Switch lab manual.



Commsupport Fault Finding Labs contain:

  1. 25 lab exercises for you to carry out

  2. Nearly 120 faults for you to fix



The manual also contains detailed solutions as to how we would logical discover the fault and fix it, we don’t leave you in the lurch scratching your heads



Today a lot of jobs require you pass a practical lab test during the interview stage, with these labs under your belt you’ll be able to ace those interview labs.







Equipment / Software required to perform these labs:



It is possible to use GNS3 for these labs. With the exception of the VLANs – SPANNING-TREE & ETHERCHANNEL and Intervlan Routing labs which can be done using live physical kit or Cisco Packet Tracer





We will advise where you will be able to obtain a legal copy of Packet Tracer





GNS3 with 7200 and 3640 IOS images. These images are available.



This manual is formatted as ePUB and will require calibre to open and read the manual link to calibre site



This ebook does not have any technical DRM restrictions and may be read on several pc’s, ereaders, tablets and smartphones



Reselling, uploading to the internet or any other way of digital distribution is prohibited.

This eBook contains

several visible and invisible marks, such as name, email address and transaction code, by which illegal distribution can be traced.

You may also like…

New Cisco CCNA 200-301 Updates When You Book Your CCNA Route & Switch Course Today