Cisco CCNA Routing & Switching 200-125 Walk Through Labs
Posted: June 7th, 2018
Epub Manual CCNA 200-125 Walk Through Labs
CCNA 200-125 Route & Switch Walk Through Lab Manual
The first manual of the CCNA 200-125 Routing and Switch series. If you want the best start then start here.
By purchasing this manual you will also get 1 year of email support from our instructors along with being enrolled onto Commsupport Networks Live Instructor-led Live Online revision sessions.
DOWNLOAD CCNA Routing & Switching Labs 200-125 V3-11.2 (FORMAT PDF)
The Commsupport Cisco CCNA Routing & Switching 200-125 Walk Through Labs are designed with the purpose of starting you the very beginning of working with Cisco switches and routers so that you understand the basic commands, to creating VLANs. Configuring Spanning Tree, Static Routing, Dynamic Routing with OSPF, EIGRP, RIP, BGP, coving all you need to know about ACL’s and NAT and a lot more.
All the labs have been designed to take you through all of the core CCNA 200-125 Route & Switch subjects but to hone your skills as a network engineer.
This manual is the result of over 10 years of development in the classroom and started life as a series of very short labs which over the years with lots of input from our very own students we have we believe created the very best CCNA 200-125 Route & Switch lab manual.
Walk Through Labs contain:
Hundreds of lab exercises for you to carry out
Numerous challenge labs to test your skills
Lots of exam type questions are the start and end of most lab sections
Version 3.11 of the CCNA Routing & Switching 200-125 Build Labs manual contains hundreds of hands-on exercises individual labs which can be carried out on either physical Cisco devices or GNS3.
The labs explain each of the commands you will enter along with the expected results at the end of most lab sections you will find additional bonus Challenge labs, lots of quizzes to test your knowledge before you embark on a lab and knowledge check quizzes at the end of most labs to check your progress.
Today a lot of jobs require you pass a practical lab test during the interview stage, with these labs under your belt you’ll be able to ace those interview labs.
Equipment / Software required to perform these labs:
Lab sections 1, 2, 3, 4 in Part one will require Packet Tracer
Lab sections 2 in Part 2 will require Packet Tracer.
We will advise where you will be able to obtain a legal copy of Packet Tracer
GNS3 with 7200 and 3640 IOS images. These images are available.
This manual is formatted as ePUB and will require calibre to open and read the manual link to calibre site
This ebook does not have any technical DRM restrictions and may be read on several pc’s, ereaders, tablets and smartphones
Reselling, uploading to the internet or any other way of digital distribution is prohibited.